Windows 2000 - Yamaha 01V96 Installation Manual

Windows 2000

Start your computer and Windows, log on as the Administrator, and then
1
insert the included CD-ROM into your computer's CD-ROM drive.
Go to My Computer–>Control Panel–>System–>Hardware–>Driver Sign-
2
ing–>File Signature Verification, select "Ignore—Install all files, regardless of
file signature," and then click OK.
Turn off your Yamaha mixing console, and then use a USB cable to connect
3
its USB TO HOST port to a USB port on your computer.
4 Turn on your Yamaha mixing console.
The Found New Hardware Wizard appears.
5 Click Next.
Select "Search for a suitable driver for my device (Recommended)," and then
6
click Next.
In the subsequent window, select "CD-ROM drives" only, and then click Next.
7
Note: You may be prompted to insert your Windows CD-ROM. Do not insert it! Click OK,
and in the "Copy files from" section of the subsequent dialog box, enter "D:\USBdrv2k_"
(replacing "D" with the drive letter of your CD-ROM drive), and then click OK.
The driver is installed, and the message "Completing the Found New Hardware Wizard"
appears.
8 Click Finish, and then restart your computer.
Studio Manager for DM2000/DM1000/02R96/01V96—Installation Guide
13
USB MIDI Driver