Installation - Miele DA 3160 Operating And Installation Instructions

installation
,7 2 hose clips
to secure the vent ducting to the vent
connection,
,9 2 runners
(! x right, lx left) to support the hood
in the cabinet,
_ t spacer strip
to conceal the gap between the rear
of the appliance and the wall,
(_ Installation kit for recircuJation
mode
contains air outlet grille and hose (not
supplied with the hood, optional
accessory)
_ Installation kit DML 300 to install a
custom paneJ
contains retractable brackets and
screws (not supplied with the hood,
optional accessory)
8 screws 3.5 × 16 mm
to anchor the ventilation hood in the
cabinet,
8 screws M4 × 12 mm
to anchor the ventilation hood at the
runners,
4 screws could be used (alternatively to
the plastic rivet) to fix the spacer bar.
2 screws 4 × 30 mm
to anchor the ventilation hood at rear
wall,
4 plastic rivets
to connect the space bar with the
appliance rear wall,
25