AEG TR73CB96 User Manual page 22

Water container symbol comes on the display
and you must empty the water container.
To empty the water container:
1. Pull the water container out keeping it in a
horizontal position.
2. Pull the plastic connection out and drain
the water into a basin or equivalent
receptacle.
3. Push the plastic connection back in and
place the water container back into
position.
4. To continue the programme press the
Start/Pause button.
10.5 Cleaning the condenser
Heat exchanger flashes on
If the symbol
the display, inspect the condenser and its
compartment. If it is dirty, clean it. Do the
check not less than once a 6 months.
WARNING!
Do not touch the metal surface with bare
hands. Risk of injury. Wear protective
gloves. Clean carefully to avoid
damaging the metal surface.
CAUTION!
Do not use hard attachment on vacuum
cleaner to remove the fluff from the
condenser. This may damage the ribs of
the condenser, what leads to the lower
performance of the appliance and longer
drying time.
22 ENGLISH
To inspect:
1. Open the door. Pull the filter up.
2. Open the condenser cover.
3. Turn the levers to unlock the condenser
lid.
4. Lower the condenser lid.