Table of Contents
Advertisement
10.3 Cleaning the filter
At the end of each cycle the
comes on the display and you must clean the
filter.
The filter collects the lint during the
drying cycle.
To achieve the best drying performance
clean the filter regularly. The clogged
filter causes the longer drying cycle and
as a consequence the energy
consumption increase.
Clean the filter by hand. Use a vacuum
cleaner if necessary.
CAUTION!
When cleaning the filters, the lint should
be thrown in the garbage bin and not
washed through the drain in order to
avoid spreading microplastics in the used
water system.
1. Open the door. Pull the filter up.
2. Push the hook to open the filter.
3. Gather lint with hand from both internal
parts of the filter.
Filter symbol
Throw the lint in the dustbin.
4. If necessary, clean the filter with a
5. If necessary, remove lint from the filter
10.4 Emptying the water container
Empty the condensed water container after
each drying cycle.
If the condensed water container is full, the
programme stops automatically. The
vacuum cleaner. Close the filter.
socket and gasket. You can use a
vacuum cleaner. Place the filter back
inside the filter socket.
ENGLISH
21
Advertisement
Table of Contents
