Ryobi RRT090-230 Manual
  1. Manuals
  2. Brands
  3. Ryobi Manuals
  4. Tools
  5. RRT090-230
  6. Manual
Ryobi RRT090-230 Manual

Ryobi RRT090-230 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
RRT090-230

Advertisement

Table of Contents
loading

Related Manuals for Ryobi RRT090-230

Summary of Contents for Ryobi RRT090-230

  • Page 1 RRT090-230...

  • Page 2: Intended Use

    shock. IMPORTANT! ■ If operating a power tool in a damp location is It is essential that you read the instructions in this manual unavoidable, use a residual current device (RCD) before assembling, operating, and maintaining the product. protected supply. Use of an RCD reduces the risk of Subject to technical modifications.
  • Page 3 ■ Maintain power tools. Check for misalignment or ■ Do not use a damaged accessory. Before each use binding of moving parts, breakage of parts and any inspect the accessory such as abrasive wheels for other condition that may affect the power tool’s chips and cracks, sanding drum for cracks, tear or operation.

  • Page 4: Kickback And Related Warnings

    excessive accumulation of powdered metal may cause ■ Do not “jam” a cut-off wheel or apply excessive electrical hazards. pressure. Do not attempt to make an excessive depth of cut. Overstressing the wheel increases the ■ Do not operate the power tool near flammable loading and susceptibility to twisting or snagging of the materials.

  • Page 5: Maintenance

    ■ Injuries may be caused, or aggravated, by prolonged use of a tool. When using any tool for prolonged periods, Wear dust mask. ensure you take regular breaks. MAINTENANCE Secure long hair above shoulder level to ■ The product should never be connected to a power prevent entanglement in moving parts.
  • Page 6 Without force With force Original Instructions...

  • Page 7: Speed Dial Settings

    SPEED DIAL SETTINGS Type of Hard Laminates Aluminum, Shell / Soft Wood Steel Ceramic Glass Accessory Wood Plastics Brass, Etc. Stone Cut-off Discs — — — — — — — Fiberglass Cut- — — — — — — off Wheel Sanding Drums 3-MAX 3-MAX...
  • Page 8 ACCESSORY Figure Accessory Application Collet (Ø 3.2 mm) Attaching bits Collet (Ø 1.6 mm) Orange 120-grit aluminum oxide grinding wheel bits Ferrous materials: casting, welds, rivets, rust (Ø 3.2 mm shank/collet) Green 120-grit silicon carbide grinding wheel Non-ferrous materials: stone, ceramics, bit (Ø...
  • Page 9 Collet sleeve Spindle lock Speed control dial Live tool indicator Tool loop Power cord On/off switch Collet Collet nut Accessories Operator’s manual Know your product...
  • Page 10 1. Press the on/off switch to the "O" position. 2. Disconnect the product from the power supply. NOTE: Insert the sanding drum into the drum sander mandrel. 1. Insert the flat end of the wrench (included) into the slot of the screw on top of the drum sander mandrel. 2.
  • Page 11 1. Press and hold the spindle lock button, and turn the shaft by hand until the spindle lock engages. 2. With the spindle lock engaged, place the included wrench on the bottom threaded end of the quick-change collet. Turn the quick-change collet counterclockwise to unlock.

  • Page 12: Product Specifications

    Rotary tool standardised test and may be used to compare one tool with Model RRT090-230 another. They may be used for a preliminary assessment of exposure. Voltage 220 V - 240 V...
  • Page 16 Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149 Melbourne, Australia Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand RYOBI is a trade mark of Ryobi Limited, and is used under license. 20230922v1...

Table of Contents