KitchenAid Superba Selectra KUDA22ST Use And Care Manual page 24

. Replace the trim strip and the three screws.
. With hands placed at sides of panel trim,
slide the top edge of the panel up into
position under the control panel (see
illustration to the right}.
. Hold the panel in place and open the door.
. Hold panel in position with one hand.
Replace the two screws (A} on each side of
the dishwasher door that secure the panel
assembly.
Lower Panel:
1. Remove two screws (D) located under
the access panel.
2. Pull bottom of panel out and lift up and
away from dishwasher.
3. Place panel on a smooth, flat surface
and remove the two screws (H) from
either side of the trim. Take off the
loosened piece of trim.
4. Slide the color panel out. Handle careful-
ly so the panel will not be scratched or
bent. Turn the panel to the desired col-
or. Place the color panel in position then
push the filler panel in place.
24