Managing The Tool From The Tool List - Panasonic EYFMH1WC Operating Instructions Manual

2.2 USING THE TOOL MANAGER SOFTWARE

2.2.7 MANAGING THE TOOL FROM THE TOOL LIST

A tool to operate with the Tool Manager software is selected from the tool list.
The tool list displays the tools being connected with the Tool Manager software or the tools
that have been connected before. (Up to 9 tools can be displayed.)
⿟ Data is being communicated while the communication lamp (blue) on the tool is blinking
(0.2 s cycle). Do not disconnect the USB cable. Otherwise, there will be a risk of
corrupting the data being communicated.
The item of each tool on the tool list displays information on the tool model number, serial
number, and connection status.
Tool model number
Serial number
Add to the Tool List
When you pair the tool with the Tool Manager software, it will be displayed automatically
on the tool list.
Even if the tool is disconnected, it will remain on the tool list as a disconnected tool.
(If the number of tools on the list exceeds 10, the oldest selected one will be hidden.)
EN
- 275 -
Connection status