Connecting/Disconnecting The Tool - Panasonic EYFMH1WC Operating Instructions Manual

2.2 USING THE TOOL MANAGER SOFTWARE

2.2.5 CONNECTING/DISCONNECTING THE TOOL

The tool and your PC or tablet on which the Tool Manager software is installed can be used
by connecting them with a USB cable.
Preparation: Attach a charged battery pack to the tool.
Start the Tool Manager software installed on your PC or tablet.
USB Connector
• There is a USB port on the underside of the housing in the rear of the tool. Open the
cover before use.
• USB connector (Tool side):
EN
※ USB Type-C™
※ USB Type-C is a trademark of USB Implementers Forum.
- 269 -