Table of Contents
Advertisement
KRC-999 II
DISASSEMBLY FOR REPAIR
9. Remove the 2 screws fixing the holder hanger ( 17) ).
10. Ensuring that the cassette holder guide boss is inserted
into the slit on the mechanism chassis and paying at-
tention
to the cassette detection
lever and cassette
detection
switch
(S902), lift the cassette hanger and
cassette holder ( ®) (®).
@ Cassette hoider
Cassette detection lever
Caution in Assembly
Be careful not to deform the
cassette detection switch.
f
Cassette detection
Cassette detection
cwitch
Projection from
fever
S002
holder hanger
(Must be pushing
———
4
the leaf switch
Caution in
turning it ON.)
Assembly
)
bl
=
Down lever (A)
}
Down lever (B
2-4. Control chassis
11. Remove the E ring and washer from the flywheel! ass'y
( @), then
remove
the screws
of the leaf switch and
solenoid
(@). Be careful
not to damage the capstan
section which comes in contact with tape.
@ Precision washer-head
Loading detection
smatl screwM1.4x3
switch
[S904)
(Total: 2 screws)
@Precision screw
@ Precision
M14 x 2.5
Remove lead wire[S901.
| from
the Muting
.
.
switch
:
Gray
@ Precision
screw
M1.4-x 3
PMs90
Advertisement
Table of Contents
