Table of Contents
Advertisement
RC-999IT
MECHANISM OPERATION DESCRIPTION
5. Tape Advance (T.ADV) Mode
Selecting either FF or REW mode while in PLAY mode
causes a plunger {(PM801) to put the unit in T.ADV mode.
The sequence of events in this mode shift is described
here.
The FWD/REW motor is driven to put the unit in PLAY mode again,
and the head mount base is moved in the indicated direction until
0
point
6
hits the muting lever so that the head is placed at the T.ADV
Position. Further, faces A) -F and R hold the pinch rotier at the
T.ADV position while faces @ -F and R respectively hold the FWD
and REV levers at the T.ADV position.
Pushing the FF or REW button while in PLAY mode turns the
FWD/REV
motor (M801) which pushes the head mount base
via the PLAY gear roller.
@6-F
T.ADV lever (F) turns as arrowed and
is attracted by the plunger PM901.
RMS901
Muting lever
(3)
:
@o-R
The muting lever
The T.ADV (R) lever turns
sunneas EYOWE:
as arrowed.
Muting lever
T.ADV torsion spring
T.ADV lever (F)
T.ADV link
T.ADV lever (R)
Advertisement
Table of Contents
