Kenwood KRC-999II Service Manual page 11

KRC-999I1
DISASSEMBLY FOR REPAIR
15. Remove the motor washers and soldering, and take
out the motor ( @) (@) ()).
16. Remove the worm wheel gears ( QB).
@ FF/REW motor
M802
@ Washers ($1.0)
€ Worm wheels
@ FWD/REV motor
M801
Soldering
Caution in Assembly
When mounting the motor,
align the play drive gear and
FR drive gear at the positions
shown below (Stop positions).
Play drive gear
FR drive gear
17. Remove the washers of the intermediate gear E, FR
drive gear, play drive gear, intermediate gear B, inter-
mediate gear C, intermediate gear D and intermediate
gear A, and remove the gears from the reel support
ass'y (control chassis) { )) to ( B).
as Washer ($1.0)
Washer (1.0) ; ®
Play drive gear
>
® Washer (¢1.0) )
Intermediate ©
)
on +®
Intermediate
gear (B) Sa gear (E)
Washer (1.0)
@———
Washer (¢0.6)
®
Q-—_ Intermediate
®@
gear (C)
-@
Intermediate
"5
diat
gear (A)
intern diete
Reej support ass'y
{control chassis)
Washer (#1.0)
®
FR drive gear SS
11