Table of Contents
Advertisement
KRC-999 IT
DISASSEMBLY FOR REPAIR
11.
Remove the 2 screws fixing the switch box to the sub-
chassis from the bottom side ( ®@ ).
12. Similarly to above, remove the 2 screws from the upper
side (Q).
13.
Remove
the
3 screws
fixing the metallic
holder to
the chassis caulking ass'y, and take out the metallic
holder (®).
14. Disconnect connectors CN3 and CN6 on the DOLBY
Unit (X14-), disconnect its connection
(CN11, CN13)
with the Electrical Unit (X25-) (A/4), and take out the
DOLBY
Unit in the direction of the arrow ( ®).
15, Disconnect the remote contro! cord from CN12 of the
ELECTRIC Unit (X25-) (A/4) (€B).
16, Disconnect
connectors
CN7,
CN8,
CN9,
CN10
and
CN18 on the ELECTRIC Unit (X25-) (A/4) (QB).
17, Remove
the
4 screws
fixing
the
ELECTRIC
Unit
;
(X25-) (A/4) onto the chassis caulking ass'y ( ®).
®
t
(X14-2190-41)
2. Mechanism Ass'y
2-1. Capstan motor
1. Remove the capstan belt and loading belt ('d) (@).
2. Remove
the 2 screws
fixing the capstan motor
(©)
(@). Now the motor can be removed and replaced.
@ Capstan belt
@ Loading belt
Capstan motor
{M901
Advertisement
Table of Contents
