Table of Contents
Advertisement
Doc Title
:
User's Guide
Model
:
Motorola M80×C
4.20.5.1
Recording the announcement
1. Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select ANSWER MACHINE.
2. Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select ANNOUNCEMENT.
3. Press <MENU> to select RECORD.
4. Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select the answer mode ANNC & RECORD or
ANNOUNCE ONLY.
5. Press <MENU> to start recording after the beep.
6. Press <MENU> again to stop recording and save the message. The just saved message is played
automatically.
NOTE
When playing the recorded message, press <MUTE/CLEAR/BACK/X> to delete it and the pre-recorded message
will be set automatically.
4.20.5.2
Playing the announcement
1.
Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select ANSWER MACHINE.
2.
Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select ANNOUNCEMENT.
3.
Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select PLAY.
4.
Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select the answer mode ANNC & RECORD or
ANNOUNCE ONLY.
5.
Press <MENU> and the message will be played.
4.20.6 Recording a memo
You can record a memo which is stored in your answering machine and played back like a normal message.
1.
Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select ANSWER MACHINE.
2.
Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select RECORD MEMO.
3.
Press <MENU> to start recording.
4.
Press <MENU> again to stop recording and save the message. The just saved message is played
automatically.
NOTE
When playing the message, press <MUTE/CLEAR/BACK/X> to delete it.
4.20.7 Call screening on/off
Call screening allows you to hear the message being recorded, and if you want, you may interrupt the message
recording and take the call.
1.
When the answering machine is recording, the cordless handset displays SCREENING?.
2.
Press <MENU> to listen to the caller through the handset earpiece, the handset displays CALL SCREENING.
3.
Press <SPEAKER> to listen with the handset loudspeaker.
4.
Press <MUTE/CLEAR/BACK/X> to stop screening and leave the answering machine to record the message.
5.
Press <HOME> to talk to the caller and stop recording.
4.20.8 Deleting all old messages
1.
Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select ANSWER MACHINE.
2.
Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select DEL ALL OLD MSG.
3.
Press <MENU>. DELETE ALL OLD MESSAGES? will be displayed.
4.
Press <MENU> to confirm the setting.
NOTE
When the answering machine is full, <TAM Icon> will flash if there are new messages. ERASE SOME
ANSWERER MSG will toggle within 2 seconds with MEMORY FULL. At this point, delete some messages to free
up the memory.
4.20.9 Remote access
Remote access allows you to operate your answering machine and listen to your messages by calling from
external line.
To turn the remote access on/off
1.
Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select ANSWER MACHINE.
2.
Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select REMOTE ACCESS.
3.
Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select ON or OFF.
4.
Press <MENU> to confirm the setting.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Revision :
Page(s) :
1.0
26 of 32
Advertisement
Table of Contents
