Table of Contents
Advertisement
Doc Title
:
User's Guide
Model
:
Motorola M80×C
4.19 Resetting all settings
1.
Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select RESET SETTINGS.
2.
Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select ALL SETTINGS.
3.
Press <MENU> to select YES. All personalized settings will be reset to default.
NOTE
All of your phonebook entries, calls list and redial list will remain unchanged after resetting.
4.20 Using your answering machine
4.20.1 Playing messages
1. Press <ANSWERING MACHINE/MUTE/CLEAR/BACK/X> on the cordless handset from idle mode. New
messages will be played followed by any older messages.
2. During message playback, press the keys below on the cordless handset to perform the following functions:
Press to repeat the current message from the beginning.
Press twice to play the previous message.
Press to stop the current message playback.
Press to skip to play the next message.
<KEY 5> or <MUTE/
Press to delete the current message and the next message will be played.
CLEAR/ BACK/X>
Press to increase the volume.
Press to decrease the volume.
Press to toggle the message playback with earpiece/speakerphone.
NOTE
When you are on either a call, the answering system will not answer the second incoming call.
4.20.2 Turning on or off the answering machine
1.
Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select ANSWER MACHINE.
2.
Press <MENU> and <VOL+> or <REDIAL/VOL-> to select ANSWERER ON or ANSWERER OFF. If the
answering machine is turned on originally, ANSWERER OFF will be displayed. If the answering machine is
turned off originally, ANSWERER ON will be displayed.
3.
Press <MENU> to confirm the setting.
4.20.3 Setting the announcement mode
1.
Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select ANSWER MACHINE.
2.
Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select ANSWERER MODE.
3.
Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select the announcement modes:
․
ANNC & RECORD invites your callers to leave a message.
․
ANNOUNCE ONLY lets callers hear your announcement but they cannot leave a message.
4.
Press <MENU> to save the setting.
4.20.4 Setting the rings to answer
1.
Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select ANSWER MACHINE.
2.
Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select RINGS TO ANSWER.
3.
Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select the rings to answer. (4 options are available:
TOLL SAVER, 3, 4, or 5 RINGS).
4.
Press <MENU> to save the setting.
NOTE
If Toll Saver setting is selected, the answering machine will pick up after two rings if there are new messages, and
after four rings if there is no message.
4.20.5 Announcement
This is the message your callers hear on the answering machine. There are two pre-recorded outgoing messages,
or you can record your own message.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Revision :
Page(s) :
1.0
25 of 32
Advertisement
Table of Contents
