Table of Contents
Advertisement
Doc Title
:
User's Guide
Model
:
Motorola M80×C
3.19.6 Recording a memo
You can record a memo which is stored in your answering machine and played back like a normal message.
1.
Press <MENU> and then <+/-> to select ANS. MACHINE.
2.
Press <MENU> and then <+/-> to select RECORD MEMO.
3.
Press <MENU> to start recording.
4.
Press <MENU> again to stop recording and save the message. The just saved message is played
automatically.
NOTE
You can also record a memo by pressing and holding <Skip Forward/MEMO> to start recording after a beep sound
is heard. Press <MENU> to stop recording and save the message.
NOTE
When playing the message, press <MUTE/CLEAR/X/FIND> to delete it.
3.19.7 Call screening on/off
Call screening allows you to hear the message being recorded, and if you want, you may interrupt the message
recording and take the call.
If call screening is set to be ON, you can listen to the caller leaving the message through the base speaker when
the answering machine is recording, the corded base displays SCREENING and the <speaker icon> lights on. You
can lift up the corded handset to talk to the caller through earpiece.
If call screening is set to be OFF, the answering machine is just recording the message. When the answering
machine is recording, the corded base displays RECORDING.
You can turn on/off base screening as follows:
1.
Press <MENU> and then <+/-> to select ANS. MACHINE.
2.
Press <MENU> and then <+/-> to select BS SCREENING.
3.
Press <MENU> and then <+/-> to turn on/off call screening.
4.
Press <MENU> to save the setting.
3.19.8 Deleting all old messages
1.
Press <MENU> and then <+/-> to select ANS. MACHINE.
2.
Press <MENU> and then <+/-> to select DEL ALL OLD.
3.
Press <MENU> to confirm and display will show DELETE ALL?
4.
Press <MENU> to confirm the setting.
3.19.9 Remote access
Remote access allows you to operate your answering machine and listen to your messages by calling from
external line.
To turn the remote access on/off
1.
Press <MENU> and then <+/-> to select ANS. MACHINE.
2.
Press <MENU> and then <+/->to select REMOTE ACC.
3.
Press <MENU> and then <+/-> to select ON or OFF.
4.
Press <MENU> to confirm the setting.
To remotely access your answering system from external line, you need to key in 4-digit security code at the
external terminal (default code is 0000).
After entering the remote access mode, press the following keys to carry out your desired function.
Press...
To...
1
Press once to repeat the current message from the beginning. Press twice to play the
previous message.
2
Play/Stop the current message playback.
3
Skip forward to the next message
4
Toggle Answer Off/Announce Only/Announce and Record modes
5
Delete the message
Listen to the Main Menu (for Full Voice prompts only)
7
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Revision :
Page(s) :
1.0
20 of 32
Advertisement
Table of Contents
