Digital Source Recording - Akai Reference Master AM-73 Operator's Manual

Before beginning
@ Turn on all the components.
® Setthe DAT deck for digital recording.
e@ Some digital sources cannot be recorded digitally.
Refer to your DAT deck's operator's manual for details.
DIGITAL INPUT
Digital source recording
2 Sigkrence, Mister
oan. wrecaaren aweuren AM-73
REC SELECTOR
Operation
Digital recording from a digital source
Set the SPEAKERS switch, DIRECT OPERATION
switch, and VOLUME control to the proper positions
for playback. Refer to page 10 for digital source play-
back details.
? Set the REC SELECTOR switch to D/A.
Set the DIGITAL INPUT switch according to which
jacks the playback source is connected to.
Example:
To record from a component
connected to the DIGITAL. 1
(OPTICAL) terminal
Set to DIGITAL. 4
During recording
@ Do not touch the REC SELECTOR switch or the DIGI-
TAL INPUT switch as this will interfere with recording.
@ |f you wish to listen to another source while recording,
select that source with the INPUT SELECTOR switch.
e During recording the VOLUME control and MUTING
switch can be used. If you wish to adjust the tone and
balance, set the DIRECT OPERATION switch to OFF
Set the DAT deck to the recording mode and start digi-
tal source playback.
Notes :
@ The DIGITAL indicator will go off when the INPUT
SELECTOR switch is set to any position other than the
D/A position. The SAMPLING indicator stays lit during
digital source recording.
@ Digital recording can only be performed if the decks are
both DAT decks.
before recording. Signals being recorded will not be af-
fected by these adjustments.
When not recording
Set the REC SELECTOR switch to AUX or any other posi-
tion which is not being used for playback.