Table of Contents
Advertisement
9 Phone settings
You can customize the settings to make it your
own phone.
Make sure that all the handsets registered to the
base station are Philips CD49 models in order
to have this feature functioning properly.
Sound settings
Set the handset's ringtone
You can select from 10 ringtones.
1
Select [Menu] >
Tone], then press [OK] to confirm.
2
Select a ringtone, then press [OK] to
confirm.
» The setting is saved.
Set the handset's ringtone volume
You can select among 5 ringtone volume levels,
[Progressive] or [Off].
1
Select [Menu] >
volume], then press [OK] to confirm.
2
Select a volume level, then press [OK] to
confirm.
» The setting is saved.
18 EN
> [Sounds] > [Ring
> [Sounds] > [Ring
Silent mode
You can set your phone to silent mode and
enable it for a specific duration when you do
not want to be disturbed. When the silent mode
is turned on, your phone does not ring or send
any alerts or sound.
Note
•
When you press
to find your handset, or when you
activate the alarm, your phone still sends alert even
when the silent mode is activated.
1
Select [Menu] >
press [OK] to confirm.
2
Select [On]/[Off], then press [OK] to
confirm.
» The setting is saved.
3
Select [Start & end], then press [OK] to
confirm.
4
Set the time, then press [OK] to confirm.
» The setting is saved.
Note
•
When the silent mode is set to [On],
is displayed during the preset time for the silent
mode.
> [Silent mode], then
is displayed.
Advertisement
Table of Contents
