Table of Contents
Advertisement
Note
•
Charge the batteries for 8 hours before first use.
•
If the handset becomes warm when the batteries are
charging, it is normal.
Warning
•
Check the battery polarity when inserting in the
battery compartment. Incorrect polarity may damage
the product.
Configure your phone
(country dependent)
1
When using your phone for the first time,
you see a welcome message.
2
Press [OK].
Set the language
Select your language, then press [OK] to
confirm.
» The language setting is saved.
To re-set the language, see the following steps.
1
Select [Menu] >
press [OK] to confirm.
2
Select a language, then press [OK] to
confirm.
» The setting is saved.
> [Language], then
Set the date and time
1
Select [Menu] >
press [OK] to confirm.
2
Select [Set date]/[Set time], then press
[OK] to confirm.
3
Press the numeric buttons to enter the
date and time.
Note
•
If the time is in 12-hour format, press
or [PM].
•
The background color of the analog clock is red or blue
to indicate the day or night time respectively.
4
Press [OK] to confirm.
Set the date and time format
1
Select [Menu] >
press [OK] to confirm.
2
Select [Date format] or [Time format].
3
to select [DD-MM-YYYY] or
Press
/
[MM-DD-YYYY] as the date display, and
[12 Hours] or [24 Hours] as the time
display. Then press [OK] to confirm.
» The setting is saved.
Note
•
The date and time format setting is country dependent.
> [Date & time], then
to select [AM]
> [Date & time], then
EN
9
Advertisement
Table of Contents
