Share Memory
Share memory allows you to configure the size of memory that is allocated to the
integrated graphics processor when the system boots up.
Configuration options: [Auto] [32M] [64M] [128M] [256M] [512M]
Options vary depending on the memory you use on your motherboard.
Render Standby
Power down the render unit when the GPU is idle for lower power consumption.
Configuration options: [Enabled]
NPU Device
This allows you to enable or disable NPU (Neural Processing Unit) Device.
Configuration options: [Enabled] [Disabled]
GNA Device
This allows you to enable or disable GNA Device.
Configuration options: [Enabled] [Disabled]
Onboard LAN1
This allows you to enable or disable the Onboard LAN1 feature.
Configuration options: [Enabled]
Onboard HD Audio
This allows you to enable or disable the onboard HD audio.
Configuration options: [Enabled] [Disabled]
Deep S5
Mobile platforms support Deep S5 in DC only and desktop platforms support Deep S5 in
AC only. The default value is [Disabled].
Configuration options: [Auto] [Disabled]
Restore on AC/Power Loss
The option allows you to select the power state after a power failure.
[Power Off] sets the power to remain off when the power recovers.
[Power On] sets the system to start to boot up when the power recovers.
[Disabled]
[Disabled]
NUCS Ultra 100 BOX Series
29