Answer a call
When there is an incoming call, the phone rings.
Press
or
to answer the call.
Warning
•
When the handset rings or when the handsfree is
activated, keep the handset away from your ear to
avoid ear damage.
Note
•
The caller ID service is available if you have registered
to the caller ID service with your service provider.
Tip
•
When there is a missed call, a notification message
appears.
Turn off the ringer for an incoming call
When the phone rings, press [Silent].
Adjust the earpiece/speaker
volume
Press
/
to adjust the volume during a call.
» The earpiece/speaker volume is
adjusted and the phone is back to the
call screen.
Mute the microphone
1
Press
during a call.
» The handset displays [Mute on].
» The caller cannot hear you, but you can
still hear his voice.
2
Press
again to unmute the microphone.
» You can now communicate with the
caller.
Turn the speaker on or off
Press
.
Make a second call
Note
•
This service is network dependent.
1
Press
during a call.
» The first call is put on hold.
2
Dial the second number.
» The number displayed on the screen is
dialed out.
Answer a second call
Note
•
This service is network dependent.
When there is a periodical beep to notify you
of an incoming call, you can answer the call in
these ways:
1
Press
and
to answer the call.
» The first call is put on hold, and you are
now connected to the second call.
2
Press
and
to end the current call and
answer the first call.
Switch between two calls
You can switch your calls in these ways:
•
Press
and
; or
Press [Option] and select [Switch calls],
•
then press [OK] again to confirm.
» The current call is put on hold, and you
are now connected to the other call.
EN 13