Sony DVP-CX995V Operating Instructions Manual page 16

When you have more than one SonyDVDplayer
If the supplied remote interferes _,ith your other Sony DVD player, change the commmld mode
setting for this player and the supplied remote 1oone thai differs fi'om the other Sony DVD
player.
The default command mode setting for this player and the supplied remote is DVD 1.
To changethe settingfor the remote
1
Slide the COMMAND MODE switch on the remote to select the command mode (DVD 1,
DVD 2, or DVD 3) so that the setting R)r the remote differs fi'om that of the other DVD
players.
For example, if tile other DVD players respond to the default command mode setting R)r tile
supplied remote (DVD 1), set the remote to DVD 2 or DVD 3.
To changethe setting for the player
I/(3
ENTER
1
Press |/(_) to turn ofl the system.
2
Hold down ENTER on the player and press I/(,_)on the player.
Tile command mode appears on the front panel display.
3
Repeat steps 1 and 2 until tile displayed command mode matches thai of tile supplied remole.
16