Advertisement
Operating the Radio
Manual Tuning
1. Press RADIO ON/SLEEP to turn on the
radio. The band, frequency and preset
number indications will be displayed in
the display window after "On" and
preset number appear for about 2
seconds. They change to the current
time indication after about 10 seconds.
2. Adjust VOL (Volume).
3. Press BAND to select the band.
Every push changes the band as follows.
(The last frequency selected in each band
appears.)
LW 2AM
(MW) > FM
Wants
seo)
FM/AM = ICF-C733 only
FM/MW/LW
= ICF-C733L only
4, Tune ina
station by pressing the + or ~
button of TIME SET/TUNE.
The FM channel step is set to 0.05 MHz
or (The FM
frequency indication
changes every 0.1 MHz.).
The AM (MW) channel step is set to
9 kHz.
9 kHz for models for other countries.
The LW channel step alternates between
2 kHz and 7 kHz.
A beep sounds at the band edge.
* To turn off the radio, press RADIO OFF/ALARM
RESET.
* To improve radio reception
FM: Extend the FM wire antenna fully to
improve FM reception.
AM (MW)/LW: Rotate the unit horizontally for
optimum reception. A ferrite bar antenna is
built into the unit.
¢ To check the station vou are listening to, press
RADIO ON/SLEEP.
The band and frequency appear for 10 seconds.
For the Customers Supplied with an
FM Antenna Coupler
Clamp the AC power cord with the supplied
coupler and connect it to a wall FM antenna
terminal for optimum FM reception.
FM antenna coupler*
...
FM wire antenna
to FM
antenna
terminal
- AC power cord
* See "Specifications" for models supplitd
with the FM antenna coupler.
Preset Tuning
Presetting the Station
You can preset up to 5 stations in FM/AM(MW)/
IW with numbered buttons 1 to 5.
kxample. To sel AM 1260 Kitz in preset number 2.
1. Tune in to AM 1260 kHz (See "Manual
Tuning").
2. Press CLOCK/ENTER.
"P" flashes for about 10 seconds.
PRESET
3. Press the "2" button while "P" is
flashing.
The beep sounds twice and the station is
preset. Though the indication changes
to the current time after 10 seconds, the
preset number remains.
* To change the preset station, set a new station's
frequency in the number whose station you
want to change. The previous frequency is
canceled. .
* Note that the preset 1 station is used for the
wake up station of the radio alarm.
Tuning in a Preset Station
1. Press RADIO ON/SLEEP to turn on the
radio.
2. Press the preset number button of the
station.
The band, frequency and preset number
appear in the display window.
After 10 seconds, the indication changes
to the current time. The preset number
remains.
* To turn off the radio, press RADIO OFF/ALARM
RESET.
* To check the station you are listening to, press
the preset number button.
The band and frequency appear for 10 seconds.
Advertisement
