Recording - Yamaha RX-V557 Owner's Manual

RECORDING

Recording adjustments and other operations are
performed from the recording components. Refer to the
operating instructions for those components.
PRESET/TUNING FM/AM A/B/C/D/E
EDIT
NEXT
SEARCH MODE XM CATEGORY
PROGRAM
PHONES
SPEAKERS STRAIGHT TONE CONTROL
A B
STANDBY
/ON
EFFECT
SILENT CINEMA
1
CODE SET
POWER
TV
CD
2
DVD
VCR
TV VOL
TV MUTE
1
Turn on the power of this unit and all
connected components.
2
Select the source component you want to
record from.
INPUT
or
Front panel
3
Start playback (or select a broadcast station)
on the source component.
4
Start recording on the recording component.
y
Do a test recording before you start an actual recording.
50
RECORDING
(U.S.A. model)
VOLUME
MEMORY TUNING MODE
l PRESET/TUNING/CH h
MAN'L/AUTO FM AUTO/MAN'L MONO
LEVEL
DISPLAY
INPUT
INPUT MODE MULTI CH
INPUT
VIDEO AUX
VIDEO L AUDIO
2
TRANSMIT
SYSTEM
POWER STANDBY POWER
1
AV
MD/CD-R TUNER SLEEP
DTV/CBL V-AUX MULTI CH IN
AMP
TV CH VOLUME
TV INPUT
CD MD/CD-R TUNER SLEEP
DVD DTV/CBL V-AUX MULTI CH IN
VCR
Remote control
Notes
• When this unit is set in the standby mode, you cannot record
between other components connected to this unit.
• The setting of TONE CONTROL, VOLUME, "SP LEVEL"
(page 59) and the sound field programs does not affect recorded
material.
• A source connected to the MULTI CH INPUT jacks of this unit
cannot be recorded.
• S-video and composite video signals pass independently
through this unit's video circuits. Therefore, when recording or
R
dubbing video signals, if your video source component is
connected to provide only an S-video (or only a composite
video) signal, you can record only an S-video (or only a
composite video) signal to your VCR.
• Digital signals input to the DIGITAL INPUT jacks are not
output to the analog AUDIO OUT (L/R) jacks for recording.
Likewise, analog signals input to the AUDIO IN (L/R) jacks are
not output to the DIGITAL OUTPUT jack. Therefore, if your
source component is connnected to provide only digital (or
analog) signals, you can only record digital (or analog) signals.
• A given input source is not output on the same REC OUT
channel. (For example, the signal input from VCR IN is not
output on VCR OUT.)
• Check the copyright laws in your country to record from
records, CDs, radio, etc. Recording of copyrighted material may
infringe copyright laws.
If you playback a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.
Special considerations when recording
DTS software
The DTS signal is a digital bitstream. Attempting to
digitally record the DTS bitstream will result in noise
being recorded. Therefore, if you want to use this unit to
AMP
record sources that have DTS signals recorded on them,
the following considerations and adjustments need to be
made.
For DVDs and CDs encoded with DTS, when your player
is compatible with the DTS format, follow its operating
instructions to make a setting so that the analog signal will
be output from the player.