Adjustment Procedures - Denon DVD-5000 Service Manual

Adjustment Procedures
Equipment Necessary for Adujustment
. Measuring Equipments
=
General measuring equipments including an oscilloscope.
2. DVD Test Disc
Part No. DVDT-S01 (Single Layer)
3. Video-CD/CD-DA Test Disc
Part No. PVCD_K06
4. Others
Conventional Tools, Hex. wrench (1.5 mm), and etc.
FRONT SIDE
ADJUSTMENT '
SCRE ' '
This table can be slid.
i]
ADJUSTMENT. _} ADJUSTMENT
TABLE SCREW
Fig. Adjustment Table
Use a hex. wrench a .5 mm) to adjust from the hole of the bottom
plate on the main unit.
Tilt Adj. Screw
Tangential Adj. Screw
Fig. Location of Slant Adjustment Screws
14
Adjustment Points
Optical Adjustment
1. The disc motor.
2. The laser pick-up.
3. The Traverse motor unit.
Remarks:
traverse unit.
Electrical Adjustment
© Perform adjustment according to adjustment procedures.
disc may be not able to play-backed properly.
_
wo