fa
OVD-5000
2. The tray can be manually moved to the open position.
<]m Push
Tray
=
Fig. 2-3-2 Manual Movement of the Tray
3. The left and right catchers are locked so that the tray will
not slip out. Therefore remove the tray while spreading
these catchers outward.
Fig. 2-3-3 Removal of the Tray
2-4. Removing the Traverse Unit
1. Remove the 2 screws setting the Rotary Support Plate
Spring.
Then remove the 2 screws fixing the Chassis
Stoppers and the Springs (two each).
Chassis
Stopper
Fig. 2-4-1 Removal of the Traverse Unit
10
Loading Motor