Yamaha R-V905 Owner's Manual page 34

AUTOMATIC PRESET TUNING (For FM stations only)
You can also make use of an automatic preset tuning function for FM stations only. Using this function, this unit performs automatic
tuning and sequentially stores FM stations with strong signals. Up to 40 stations are stored automatically in the same way as in the
manual preset tuning method on page 32. Note that a new setting can be stored in place of the former one.
To store stations
1
Select the FM.
Front panel
2
Press TUNING MODE (so that the "AUTO TUNING"
indicator lights up on the display).
Front panel
3
Press MEMORY and hold for about three seconds.
Front panel
34
3 1
2 4
4
To tune in to higher frequencies, press the UP side of
TUNING once.
To tune in to lower frequencies, press the DOWN side
of TUNING once.
* If TUNING is not pressed, in a while, the automatic preset
tuning begins automatically toward higher frequencies.
The automatic preset tuning begins from the frequency
currently displayed. Received stations are stored to A1, A2
... A8 sequentially.
* If more than 8 stations are received, they are also stored
Lights up.
to the preset station numbers in other groups (B, C, D and
E) in that order.
If you want to store the first station received by the auto-
matic preset tuning to a desired preset station number.
For example, if you want to store the first received station to C5,
select "C5" while "A1", the "MEMORY" indicator and the "AUTO
TUNING" indicator flash after pressing MEMORY in step 3. Then
press TUNING. The first received station is stored to C5, and
Flashes.
next stations to C6, C7 ... sequentially.
If stations are stored up to E8, automatic preset tuning stops
automatically.
When automatic preset tuning is finished
The display shows the frequency of the last preset station.
Check the contents and the number of preset stations by
following the procedures in the section "To recall a preset
station" on page 33.
Front panel