Yamaha R-V905 Owner's Manual page 16

CONNECTING TO DIGITAL (COAXIAL AND/OR OPTICAL) TERMINALS
If your DVD (LD) player, TV/DBS tuner, etc. are equipped with
coaxial or optical digital audio signal output terminals, they can
be connected to this unit's COAXIAL and/or OPTICAL digital
signal input terminals.
To make a connection between optical digital audio signal
terminals, remove the cover from each terminal, and then
connect them by using a commercially available optical fiber
cable that conforms to EIAJ standards. Other cables might not
function correctly.
Even if you connect an audio/video unit to the COAXIAL (or
OPTICAL) terminal of this unit, you must keep the unit con-
nected with the same named analog audio signal terminals of
this unit, because digital signal cannot be recorded by a tape
deck or VCR connected to this unit. You can switch the
selection of input signals between "digital" and "analog" easily.
(See page 29 for details.)
DVD or LD player
FM
ANT
GND
AM
ANT
16
EXTERNAL DECODER INPUT
MAIN CENTER SURROUND
COAXIAL
75 UNBAL. DVD/LD
L
R
SUB WOOFER
GND
VIDEO SIGNAL
MONITOR
OUT
AUDIO SIGNAL
L L
R R
IN OUT
(PLAY) (REC)
PHONO CD TAPE/MD
Notes
• When connecting an audio/video unit to both of the digital
and analog terminals of this unit, make sure to connect to
both terminals of the same name.
• Be sure to attach the covers when the OPTICAL terminals
are not being used, in order to protect the terminals from
dust.
• The input signal from the DVD/LD input terminals is selected
in the following order of priority.
(input mode: AUTO position)
1 COAXIAL terminal
2 OPTICAL terminal
3 ANALOG terminal
• All digital audio signal input terminals are applicable to the
sampling frequency of 32 kHz, 44.1 kHz and 48 kHz.
TV/DBS tuner
(U.S.A. model)
DIGITAL SIGNAL
OPTICAL
DVD/LD TV/DBS
IN OUT
DVD/LD TV/DBS VCR
OUTPUT
SUB
IN OUT
WOOFER
DVD/LD TV/DBS VCR