Setting Manufacturer Codes - Yamaha HTR-5750 Owner's Manual

REMOTE CONTROL FEATURES

Setting manufacturer codes

You can control other components by setting the
appropriate manufacturer codes. Codes can be set up for
each input area. For a complete list of available
manufacturer codes, refer to "LIST OF
MANUFACTURER CODES" at the end of this manual.
The following table shows the factory preset component
(Library: component category) and the manufacturer code
for each area.
Component
Input
category
area
(Library)
CD CD
MD/CD-R MD
TUNER TUNER
DVD DVD
DTV/CBL –
V-AUX –
VCR –
–
–
Note
You may not be able to operate your YAMAHA component even
if a YAMAHA manufacturer code is initially set as listed above.
In this case, try to set other YAMAHA manufacturer code(s).
52
Manufacturer Code
YAMAHA 0005
YAMAHA 0024
YAMAHA 0003
YAMAHA 0098
– –
– –
– –
– –
– –
1
Press an input selector button or
select the component you want to set up.
CD MD/CD-R
DVD DTV/CBL
VCR
2
Press CODE SET using a ballpoint pen or
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
CODE SET
3
Press the numeric buttons to enter the four
digit manufacturer's code for the component
to be used.
Refer to "LIST OF MANUFACTURER CODES" at
the end of this manual.
STEREO
1
MUSIC ENTERTAIN
5
q/DTS
9
The TRANSMIT indicator on the remote control
flashes twice.
Notes
• If the manufacturer of your component has more than one code,
try each of them until you find the correct one.
• If you wait for more than 30 seconds during step 3, the setup
process is canceled. If this happens, start over from step 2.
/
TUNER SLEEP
V-AUX MULTI CH IN
AMP
TRANSMIT
HALL JAZZ ROCK
2 3 4
TV THTR MOVIE
6 7 8
NIGHT EX/ES STRAIGHT
0 10 ENTER
EFFECT
to