Table of Contents
Advertisement
■ Airflow direction range
Up/down airflow direction
Change by
1
Swing operation by
2
Cooling, Dry
3
Heating
4
5
Fan *
6
* The Swing operation range depends on the airflow direction set before
the Swing operation.
NOTES:
• Do not adjust the horizontal louver position by hand.
• In the Auto or Heating mode, the airflow direction stay position 1 for
a while from the start of the operation.
• In the Cooling or Dry mode, position 1-3 is recommended to prevent
condensation drips damaging your property. If position 4-6 keeps for
30 minutes or more in these modes, the airflow direction changes to
position 3 automatically.
6. TIMER OPERATIONS
NOTE:
• When [
] indicator on the indoor unit blinks, set the clock and
timer again. This blinking shows that the internal clock go wrong due
to an interruption of the power supply. (Refer to page 11.)
■ Timer setting procedure
Before setting the timer, adjust the clock.
1. Press
.
on the remote controller display will blink.
(
)
2. Press
to choose timer operation.
The timer operation will change as follows:
Weekly timer
On timer
[
]
Off timer
[
]
Program timer
[
]
Sleep timer
3. Press
.
4. Set each timer operation.
For details, refer to the following instructions of each timer setting.
5. Press
to complete the timer setting.
Be close to the indoor unit.
• To cancel the timer setting during the procedure, press
again.
1 ⇄ 2 ⇄ 3 ⇄ 4 ⇄ 5 ⇄ 6
1
4
3
6
1
4 or 3
(Refer to "3.3. Inserting batteries")
Enables you to set operation
schedules up to 4 setting for each
day of the week.
Starts the operation at your desired
time.
Stops the operation at your desired
time.
Operates as the combination of the
On timer and Off timer.
Supports your comfortable sleep
by moderating the air conditioner
operation gradually.
6.1. Weekly timer
■ Setting details
1. Select Weekly timer in step 2 of "Timer setting procedure".
(
2. Press
day of the week.
Selected program number (1~4) and the day of the week will blink.
6
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
3. Press
.
(
4. Press
(Without a timer)
5. Press
.
* When you chose "Without a timer" in step 4, the setting display will
return to step 1.
(
6. Press
7. Press
.
* When you chose "Off timer" in step 4, the setting display will return
to step 1.
(
)
8. Press
Temperature setting range
Auto, Cooling,
18.0-30.0 °C
or Dry mode:
*Even if you set to 10.0, 16.0-17.5 °C, the air
Heating mode:
10.0 or 16.0-30.0 °C
9. Press
.
The setting display will return to step 1.
10. Press
to complete the setting.
Be close to the indoor unit.
NOTE: [
] indicator on the indoor unit will not turn on even if the
setting is complete.
• If you want to return the previous step, press
• To check the schedule, use
timer settings in step 1.
To finish checking, press
• To deactivate the Weekly timer, press
shown on the remote controller display.
The indicator will disappear.
NOTES:
• The operation modes will be the same as the mode at the last time
operation was stopped, so Cooling → Heating → Cooling → Heating
type of operations cannot be set automatically.
• If you set the On timer and Off timer on the same time, the On timer
will work.
• If two On timers are set on the same time, the air conditioner will run
in the order of the program number.
• You cannot the Weekly timer and the other timers simultaneously.
If you use the On/Off timer, the Program timer, or the Sleep timer
while the Weekly timer is activated, the Weekly timer will be
deactivated.
In such a case, activate the Weekly timer after the other timer
finishes.
• If the wired remote controller (optional) is connected, this function is
restricted.
)
to select the program number and the
Program number
Day of the week
)
to choose the timer operation.
(On timer)
(Off timer)
)
to set on time or off time.
to set the temperature.
conditioner will run at 18.0 °C.
.
(
)
to browse the Weekly
.
while
is
En-6
Advertisement
Table of Contents
