Table of Contents
Advertisement
Something is not right: have a
look at the instruction manual
to improve things
The water circuit is empty.
Ready to fill?
Prepare at least 3 coffees
before changing
The inside of the machine is very
dirty.
The water circuit is empty
A new water softener filter has
been inserted
Energy saving is activated.
Remember that the machine needs
descaling.
Remember that the filter needs
replacing
Steam wand rinsing
The machine needs to make 3 deliv-
eries before an adjustment can be
changed using "Bean Adapt"
44
Clean the inside of the machine
thoroughly, as described in section
"Cleaning the
machine"". If the mes-
sage is still displayed after cleaning,
contact De'Longhi Customer Ser-
vices and/or an approved Service
Centre
Press "OK" to fill the circuit. Delivery
stops automatically. Water may be
noticed in the drip tray after filling
the circuit: this is quite normal.
If the problem persists, make sure
the water tank is fully inserted.
Make sure the instructions for in-
serting the new filter have been fol-
lowed correctly (section
the filter"
e
"Replacing or removing
the
filter"). If the problem persists,
remove the filter.
To deactivate energy saving,
proceed as described in section
"General".
The descaling procedure described
in section
"Descaling"
needs to be
carried out without delay.
Replace the filter or remove it as
described in section
"Replacing or
removing the
filter".
See section
"Rinse the steam wand
after every use"
Make at least 3 coffees, then pro-
ceed with the adjustment
"Installing
Advertisement
Table of Contents
