Table of Contents
Advertisement
Flash Settings
The following settings are available with the built-in fl ash.
Setting
Setting
A
Flash control mode
B
Flash compensation/
output
MODE
Built-In Flash
Choose from the following options:
•
TTL: TTL mode. Adjust fl ash compensation (
C
a fl ash mode (
).
•
M: The fl ash fi res at the selected output (
subject brightness or camera settings. Output is expressed
in fractions of full power, from ⁄ to ⁄. The desired results
may not be achieved at low values if they exceed the limits
of the fl ash control system; take a test shot and check the
results.
•
C (primary fl ash): Choose if the fl ash is being used as a pri-
mary fl ash controlling secondly fl ash units, for example as
part of a studio fl ash system.
•
D (OFF): The fl ash does not fi re.
Adjust fl ash level. The options available vary with the fl ash
A
control mode (
).
ADJUST
END
Description
Description
Flash Photography
B
) and choose
B
) regardless of
115
5
Advertisement
Table of Contents
