The Functions; Selecting And Setting Functions - Yamaha Portable Grand DGX-230 Owner's Manual

The Functions

The "Functions" provide access to a range of detailed instrument parameters for tun-
ing, setting the split point, and adjusting the voices and effects. Take a look at the func-
tion list starting on the opposite page. There are 47 function parameters in all.
When you locate a function you want to set up, simply select the function's display
name (shown to the right of the function name in the list) and adjust as required.

Selecting and Setting Functions

1
Find the function you want to set in the
list that begins on page 76.
2
Press the [FUNCTION] button.
StyleVol
100
3
Select a function.
Press the CATEGORY [ ] and [ ] buttons as
many times as necessary until the function's
display name appears in the display.
Transpos
00
The selected function.
4
Use the dial, the [+] and [-] buttons, or
the [0]–[9] number buttons to set the
selected function as required.
The [+] and [-] buttons are used to make ON/
OFF type settings: [+] = ON, [-] = OFF.
In some cases the [+] button will initiate execu-
tion of the selected function, and the [-] will
cancel the selection.
• Decrement value by 1.
• OFF
• Cancel
Press simultaneously to recall
the default setting.
Some Function settings are stored in memory
as soon as they are changed. See "The Backup
Parameters" on page 49 for information on the
function settings that are stored on the instru-
ment. To restore all initial factor default set-
tings perform the "Backup Clear" procedure
described in the "Initialization" section on page
49.
DGX-230/YPG-235 Owner's Manual
Direct numeric
entry.
• Increment value by 1.
• ON
• Execute
75