Turning On The Power; Headphones - Yamaha Clavinova CVP-92 Owner's Manual

Turning on the Power

CVP-94
POWER

Headphones

PHONES
Standard stereo
phone jack
Z
Connect the power cord.
Insert the plugs at the ends of the cord, one into the AC INLET on the
rear panel of the CVP-94/92, and the other into a standard AC outlet.
CVP-92
X
Press the [POWER] switch. The power is turned on and the main
display appears in the LCD display. The voice of Grand Piano 1 and
the accompanimient style of 8Beat Pop1 are selected automatically at
first. The power lamp whch is located at the left front of the main
unit is lit up.
* If the LCD is difficult to read, adjust the contrast with the [CON-
TRAST] button at the left of the LCD.
* Adjust the volume by using [MASTER VOLUME].
Press [POWER] again when turning off the power. Both the display
and the power lamp at the left of the panel will turn off.
Connect a set of stereo headphones (optional) to the [PHONES] jack.
When headphones are connected, the internal speaker system is auto-
matically shut off. Since the CVP-94/92 has two PHONES jacks, two
sets of headphones can be used simultaneously, allowing two people to
enjoy listening to the performance.
Setting Up the CVP-94/92
9