Attach The Speaker Box; Attach The Pedal Box Assembly - Yamaha Clavinova CVP-103 Reference Booklet

4
• Four screws on each side
48
CVP-109/107/105/103/700
V

Attach the speaker box.

Gently rest the speaker box onto the corresponding brack-
ets on the front legs. Make sure the speaker cord is ex-
tending out from the rear of the speaker box. Loosely
secure the speaker box to the main keyboard unit using
four screws on both the front and back. (The speaker will
be secured in step B .) Insert the speaker cord connector
into the corresponding socket on the main keyboard unit,
making sure that the protruding clip on the connector is
facing up.
B

Attach the pedal box assembly.

First, remove the vinyl tie from the left leg. Make sure
you don't remove the cord holder on the top of the left
leg. Using 6 screws for each leg (four screws per leg and
two screws on each leg bracket) loosely secure the rear
leg and pedal box assembly making sure that the pedal
cord on the left leg protrudes from the cut hole on the
underside of the main unit. Once loosely attached, go
back and firmly tighten all 12 screws on the rear leg and
pedal assembly, and also secure the 8 screws on the
speaker box. After the rear leg and pedal assembly is se-
curely attached, insert the pedal cord plug into the
PEDAL connector on the rear panel.
5
• Cord holder
• Vinyl tie