Attach The Front Legs - Yamaha Clavinova CVP-103 Reference Booklet

2
• Blanket, etc.
X
Carefully lean the main unit against a wall.
To make it easier to install the legs, place a soft blanket or
similar material on the floor near a wall, close the
Clavinova keyboard cover, place the front panel of the
Clavinova (the side with the keyboard) on the blanket and
gently lean the unit against the wall — MAKING SURE
THAT IT CAN NOT FALL — as shown in the illustra-
tion.
CAUTION
• Do not lay the main unit upside-down on the floor.
C

Attach the front legs.

Securely attach the two front legs using three screws for
each leg (use a Philips "+" screwdriver) as shown in the
illustration. Make sure that the screws are firmly tight-
ened.
3
• Three screws on each side
47
CVP-109/107/105/103/700