Closing The Hood; Opening / Closing The Side Panels - Cub Cadet EX2900 Operator's Manual

■ Closing the Hood

1. Lift up the hood slightly, grasp the grip at the middle of
the hood support and pull forward to unlock the hood
support.
(A) Hood support
(B) Grip
2. Lower the hood and firmly press downward on the
upper front portion of the hood until the hood latch
locks the hood in the closed position.
3. Attempt to lift the hood to make sure the hood latch
has locked the hood in the closed position.
CAUTION
●When closing the hood, avoid pinching fingers with
the hood or hood support.
●Support hood with other hand while unlocking
support link.

2. Opening / Closing the Side Panels

Lift the tabs on the right and left side panels (total of four
positions; two per cover), turn them 90°, and then remove
the engine side panels.
To reinstall the engine side panels, fit them in position,
turn the tabs by 90° in the opposite direction.
(a) Lift up
(b) Turn
(c) Open the side panel
(A) Side panel
(B) Tab
14. PERIODIC SERVICE
3013709
3013739
14-3
(A)
(B) (b)
(a)
(c)
(A)
Ex2900 / 3200 Operator's Manual
(B)