The Function Mode; To Select A Function - Yamaha Clavinova CLP-955 Owner's Manual

The Function Mode

The [FUNCTION] button provides access to a range of functions that give the
Clavinova extraordinary versatility. The functions are categorized in groups as
follows:
FUNC-
TION
TEMPO
FUNCTION
Operation Example
Press [+/YES]
(sub-mode)
Use FUNCTION
[<], [>]
Press [-/NO] or [+/YES]
once
Use [-/NO], [+/YES]
F1 Tuning ...................................................................... 28
F2 Scale ......................................................................... 28
F3 Dual Mode Functions .............................................. 29
F4 Split Mode Functions .............................................. 30
F5 Pedal Functions ...................................................... 32
F6 Metronome Volume ................................................. 32
F7 Preset Song Part Cancel Volume ........................... 32
F8 MIDI Functions ........................................................ 33
F9 Backup Functions ................................................... 36

To Select a Function ...

Z
Press the [FUNCTION] button so that its indicator lights.
X
Use the FUNCTION [<] and [>] buttons to select the desired
function: F1 through F9.
C
In the case of the Scale (F2), Dual Mode (F3), Split Mode (F4),
Pedal Functions (F5), MIDI (F8), and Backup (F9) functions, you
will have to press the [+/YES] button once to enter the respective
sub-mode after the function has been selected, and then use the
FUNCTION [<] and [>] buttons again to select the desired sub-
function.
V
Set the function as required by using the [-/NO] and [+/YES]
buttons (see the individual function descriptions, below).
B
Press the [FUNCTION] button so that its indicator goes out to exit
from the function mode.
...........................................................................
• Functions cannot be selected during demo/preset song playback or when
the user song recorder is in operation.
• The Dual or Split mode must be engaged before the F3 and F4 functions
can be selected, respectively. If the corresponding mode is not engaged,
" F3. - " or " F4. - " will appear on the display and the corresponding sub-
mode will not be available.
• The Dual mode can be engaged while in the Function mode, but the
Function mode must be exited before the Split mode can be engaged.
• After selecting the function, the current setting will be displayed when the
[-/NO] or [+/YES] button is pressed for the first time.
27
CLP-955