Connections - Yamaha Clavinova CLP-930 Owner's Manual

Connections

CAUTION • Before connecting the Clavinova to other electronic components, turn off the power for all compo-
nents. Before turning the power on or off for all components, set all-volume levels to minimum.
CLP-930 Bottom Panel
R L/L+R
AUX OUT
1
CLP-950 Bottom Panel
IN
Stereo System
R L/L+R
AUX OUT
DOU-10
CLP-930
8
CLP-950/930
R L/L+R
AUX IN
2
OUT THRU
PC-2 PC-1
MIDI Mac
MIDI HOST SELECT
4 3
1 AUX OUT L/L+R and R Jacks
The AUX OUT L/L+R and R jacks deliver the output of the Clavinova
for connection to an instrument amplifier, mixing console, PA system, or
recording equipment. If you will be connecting the Clavinova to a monaural
sound system, use only the L/L+R jack. When a plug is inserted into the L/
L+R jack only, the left- and right-channel signals are combined and deliv-
ered via the L/L+R jack so you don't lose any of the Clavinova's sound.
CAUTION
CLP-930
• When the Clavinova's AUX OUT jacks are connected to an external sound system,
first turn the Clavinova power on, and then the power to the external amplifier/
speaker system. Reverse this order when turning the power off.
• The AUX OUT jack signal must never be returned to the AUX IN jacks, either directly
or through external equipment.
2 AUX IN L/L+R and R Jacks
These jacks are intended for use with an external tone generator module
such as the Yamaha DOU-10 Disk Orchestra Unit. The stereo outputs from
the external tone generator module are connected to the AUX IN L/L+R
and R jacks, allowing the sound of the tone generator to be reproduced via
the Clavinova's internal sound system and speakers. A line-level mono
source can be connected to the L/L+R jack.
R L/L+R
AUX IN
CAUTION
• When the Clavinova's AUX IN jacks are connected to an external source, first turn the
power to the external device on, and then the power to the Clavinova. Reverse this
order when turning the power off.
THRU
Mac MIDI
PC-1 PC-2
TO HOST HOST SELECT
3
TO HOST
• The AUX OUT jack signal is not controlled by the Clavinova's volume or
brilliance (CLP-950) control. Use the volume control on the external audio
equipment to adjust the level.
• The input signal from the AUX IN jacks is controlled by the Clavinova's volume
and brilliance (CLP-950) controls. Reverb and effect functions will have no
affect.
• The input signal from the AUX IN jacks is delivered to the AUX OUT jacks.
MIDI
OUT IN
4
L/L+R R L/L+R R
AUX IN AUX OUT
2 1
PEDAL
5