Troubleshooting; Options - Yamaha Clavinova CLP-110 Owner's Manual

Troubleshooting

Problem
The Clavinova does not turn on.
A click or pop is heard when the power is
turned on or off.
Noise from the speakers or headphones is
audible.
The overall volume is low, or no sound is
heard.
The damper pedal has no effect, or the sound
continuously sustains even when the damper
pedal is not pressed.

Options

BC-100 Bench
A comfortable bench styled to match your Yamaha Clavinova.
HPE-160 Stereo Headphones
High-performance lightweight dynamic headphones with extra-soft ear pads.
28 Troubleshooting/Options

Troubleshooting

CLP-110 CLP-110
Possible Cause and Solution
The Clavinova has not been plugged in properly. Securely insert the female plug into
the socket on the Clavinova, and the male plug into a proper AC outlet (page 11).
This is normal when electrical current is being applied to the instrument.
The noise may be due to interference caused by the use of a mobile phone in close
proximity to the Clavinova. Turn off the mobile phone, or move it further away from the
Clavinova.
• The Master Volume is set too low. Set it to an appropriate level using the [MASTER
VOLUME] control.
• Make sure a pair of headphones is not connected to the headphones jack.
• Make sure that Local Control (page 26) is ON.
The pedal cord may not be properly connected. Make sure to securely insert the pedal
cord into the [DAMPER PEDAL] jack (page 30).