Program Change On/Off; Control Change On/Off - Yamaha Clavinova CLP-110 Owner's Manual

Program Change ON/OFF

Normally the CLP-110 will respond to MIDI program change numbers received from
an external keyboard or other MIDI device, causing the correspondingly-numbered
voice to be selected on the corresponding channel (the keyboard voice does not
change). The CLP-110 will normally also send a MIDI program change number when-
ever one of its voices is selected, causing the correspondingly-numbered voice or pro-
gram to be selected on the external MIDI device if the device is set up to receive and
respond to MIDI program change numbers.
This function makes it possible to cancel program change number reception and trans-
mission so that voices can be selected on the CLP-110 without affecting the external
MIDI device.
Procedure
While holding down the A-1 and C 0 keys, press the C 6 key.
A-1 C 0

Control Change ON/OFF

Normally the CLP-110 will respond to MIDI control change data received from an
external MIDI device or keyboard, causing the voice on the corresponding channel to
be affected by pedal and other "control" settings received from the controlling device
(the keyboard voice is not affected). The CLP-110 also transmits MIDI control change
information when the pedal or other appropriate controls are operated.
This function makes it possible to cancel control change data reception and transmis-
sion so that, for example, the CLP-110's pedal and other controls can be operated with-
out affecting an external MIDI device.
Procedure
While holding down the A-1 and C 0 keys, press the D6 key.
A-1 C 0
For information on program
change numbers for each of the
CLP-110's voices, refer to page
34 in the MIDI Data Format sec-
tion.
C 6
The highest
key
For information on control
changes that can be used with
the CLP-110, refer to the MIDI
Data Format on page 34.
D6
The highest
key
CLP-110
TIP
TIP
MIDI Functions 27