Follow these steps to enable Dual SIM Dual Standby:
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap SIM Selection
3. To enable DSDS, tap the OFF button.
4. Tap OK when prompted to reboot the computer to enable DSDS mode.
5. Provision the nano-SIM card. See
6. Use the Thales LPA app to download a profile to the eSIM Card.
Make a Phone Call
Once the phone is activated, you can make a phone call.
1. Tap
2. Use one of the methods below to enter the telephone number you want to call.
3. Tap call
4. To end the call, tap
About Apps with Push-to-Talk Functionality
The CT30 XP provides a dedicated push-to-talk button for use with common apps
that support push-to-talk functionality for voice over IP (VoIP) calls over Wi-Fi or
cellular data network connections. Once an app with push-to-talk functionality is
installed and opened, the button can be used to initiate a call after selecting a
contact from within the app.
58
After the restart is complete, open the SIM Selection app. Under Current
Configs, you should now see two listings: "Active SIM Slot 1" and "Active SIM
Slot 2" instead of only one.
Profile
on page 57.
in the favorites tray to open the phone app.
•
Tap
and use the on-screen dialer.
•
Select a person on your saved contact list
•
Select a favorite on your speed dial list
•
Select a number from the recent calls list
.
.
Provision a nano-SIM Card
.
CT30 XP Mobile Computer Series User Guide
on page 56.
SeeDownload a
.
.
.