Table of Contents
Advertisement
To delete all face images:
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Enter the PIN, pattern, or password that is used as a backup method for
4. Tap Remove face.
5. Confirm that you want to delete all face images.
Configure the Screen Backlight
The display has an ambient light sensor that automatically adjusts the backlight
intensity to conserve power and ensure the display is readable. You can also
manually set the backlight intensity if you do not want to use the automated
adaptive brightness feature.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Display.
3. Choose one of the following options:
About the Good Read LED
The Scan Status LED indicates the read status of the imager when scanning a
barcode. When active, the LED illuminates the outer ring of the front speaker. To
learn more about how to use and configure the imager for scanning, see
Use the Imager
14
> Security > Face Unlock.
unlocking the computer.
•
To have the computer automatically adjust the brightness for your work
environment, turn On the Adaptive brightness setting. You can tap
Adaptive brightness to toggle the feature On or Off.
•
To set the brightness level manually, verify the Adaptive brightness feature
is turned Off, and tap Brightness level. Adjust the slider to set the brightness
level.
beginning on page 33.
Good Read LED
CT30 XP Mobile Computer User Guide
Chapter
3:
Advertisement
Table of Contents
