Table of Contents
Advertisement
Or
Note: Single Result must be disabled for multiple outputs.
Results will be returned in the order they match the regex.
Results in Order
To only return results that match the order of the regex, select Results in Order.
When this is selected, regex are applied in the order they are listed on the Result
Regex tab. To change the regex order, hold and drag the heading to the desired
location in the list.
When Results in Order is enabled, the character strings must be in the same order
as the regex items, or no result will be returned.
For example, the result will be recognized if:
The following order would not be recognized:
For better results with multiple outputs, go to Settings > Honeywell Settings >
Scanning > Internal Scanner > Default profile > Data Processing Settings and set
the value of Suffix to "\n".
Regex Results
The following table shows how results are returned based on which settings are
enabled.
Options Selected
Regex selected
Sequence Regex not enabled
50
String1 matches regex2
String2 matches regex3
String3 matches regex1
String1 matches regex1
String2 matches regex2
String3 matches regex3
String1 matches regex1
String3 matches regex3
String2 matches regex2
Results
Results are returned in the order they are
matched.
Changing the order of the regex does not
affect the result.
CT30 XP Mobile Computer Series User Guide
Advertisement
Table of Contents
