Biostar B250ET2 User Manual page 20

EuP Control
When EuP is enabled, the system will meet EuP requirement.
Options: Disabled (Default) / Enabled in S4-S5
System Agent (SA) Configuration
Internal Graphics
This item keeps IGFX enabled based on the setup options.
Options: Auto (Default) / Disabled / Enabled
Primary Display
This item selects which of IGFX/PEG/PCI Graphics device should be Primary Display or select SG
for Switchable Gfx.
Options: Auto (Default) / IGFX / PEG / PCI / SG
GTT Size
This item select the GTT Size.
Options: 8MB (Default) / 2MB / 4MB
Aperture Size
This item selects Aperature Size. Note : Above 4GB MMIO BIOS assignment is automatically
enabled when selecting 2048MB aperture. To use this feature, please disable CSM Support.
Options: 256MB (Default) / 128MB / 512MB / 1024MB / 2048MB / 4096MB
DVMT Pre-Allocated
This item selects DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal
Graphics Device.
Options: 32M (Default) / 0M / 64M / 4M / 8M / 12M / 16M / 20M / 24M / 28M / 32M/F7 / 36M
/ 40M / 44M / 48M / 52M / 56M / 60M
DVMT Total Gfx Mem
This item selects DVMT5.0 Total Graphic Memory size used by the Internal Graphics Device.
Options: 256MB (Default) / 128MB / MAX
20 | 3. Chipset Menu