Connecting An External Unit; Maintenance - Yamaha GX-50 Owner's Manual

CONNECTING AN EXTERNAL UNIT

Video cassette player etc.
INPUT
AUX
R L
ANTENNA
FM GND AM
75 UNBAL.
INPUT SPEAKERS
AUX
R L
R L
SINCE THIS UNIT
HAS AN ACTIVE
SERVO CIRCUIT
BUILT–IN.
DO NOT CONNECT
IT TO SPEAKERS
OTHER THAN
NX–GX50.
6 MIN./SPEAKER

MAINTENANCE

Deck 1
Deck 2
Another audio unit
This system has one set of auxiliary input (AUX) terminals to
allow you to connect an external unit such as a video
cassette player, LD player, etc. to this system.
To connect an external unit to the AUX terminals
Connect the audio output cords of the external unit to the
AUX terminals on the rear of this system.
Make connections correctly so that the "L" (left) channel is
connected to "L" and the "R" channel to "R".
To listen to the source sound from the unit
connected to the AUX terminals
1
Press the AUX input selector button.
2
Operate the unit connected to the AUX terminals.
* Its audio source can be recorded by this system's tape
deck.
Internal care
•
Dirty heads, capstans and pinch rollers can cause poor
sound and tape jams.
Clean these parts with a cotton swab moistened with
commercially available head/pinch roller cleaner or
isopropyl alcohol, or with a commercially available
cleaning tape.
•
After long use, the deck's heads and capstans may
become magnetized, causing poor sound. Demagnetize
these parts once every 30 hours of playing/recording time
by using a commercially available tape head
demagnetizer. Read the demagnetizer's instructions
carefully before use.
External care
•
Periodically clean the surfaces of this system, especially
the top panel of the main unit to prevent the ventilation
holes from being blocked with dust etc.
•
Do not use chemically treated cleaning cloths or other
chemicals. (See "Precautions".)
E-45