Epson PowerLite X9 Quick Setup

PowerLite X9
®

Quick Setup

Before using the projector, make sure you read the safety instructions in the
User's Guide on your projector CD.
Connect the projector
You can connect a computer and up to 3 video devices, and use the remote
control to switch between them. Choose from the following connections:
Computer USB Port
Connect a computer using a USB cable. Connect the square end of the cable to
the projector's TypeB (square) USB port. Connect the flat end of the
cable to any USB port on your computer. You can also connect an audio cable.
Windows ® : After turning on the projector, follow the instructions on your
PC to install the Epson USB Display software (EMP_UDSE.EXE; only on first
connection).
Note: If the software screen does not display automatically, open
My Computer or Computer, then double-click EPSON_PJ_UD.
Macintosh ® : After turning on the projector, the setup folder for USB Display
appears in the Finder. Double-click USB Display Installer and follow the
on-screen instructions to install the Epson USB Display software (only on first
connection).
Computer Monitor Port
Connect a computer using the VGA cable that came with the projector.
Connect one end to the projector's Computer (Component Video) port,
and the other end to your computer's
notebook, switch it to external display (see "Troubleshooting").
You can also connect an audio cable to the Audio port or an external monitor
to the Monitor Out port (see the User's Guide on your projector CD).
*412054000*
*412054000*
monitor port. If you are using a
Video Device
Connect a video device, such as a DVD player, using any available connection
shown below (cables not included).
S-Video
cable (composite video)
You can also connect an audio cable to play sound through the projector's built-
in speaker, or connect external amplified speakers.
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector.
3
Open the A/V Mute slide all the way.
4
Press the power button on the projector or remote control.
Power light
Power button
The power light flashes green, then stays on.
NOTE: To shut down the projector, press the
unplug it. You don't have to wait for the projector to cool down.
5
The default language of the menu system is English. To select another
language, press the Menu button on the remote control. Select Extended
and press Enter. Select Language and press Enter. Select your language
and press Enter. Press the Menu button to exit the menu system.
Component video
RCA video cable
to VGA cable
power button twice, then