Epson PowerLite X11 Quick Setup

PowerLite X11/X11H/X14H
®
Quick Setup
Before using the projector, make sure you read the safety instructions in the
User's Guide on your projector CD.
Note: These illustrations show the PowerLite X11, but the instructions are the
same for the PowerLite X11H/X14H unless otherwise noted.
Connect the projector
Choose from the following connections. See the sections below or the User's
Guide on your projector CD for details.
Computer
PowerLite X11
PowerLite X11H/X14H
USB port
Connect the square end of a USB cable to the projector's
(square) port. Connect the flat end of the cable to any USB port on your
computer.
Windows ® 2000 SP4 or later: After turning on the projector, follow the
on-screen instructions to install the EPSON
(EMP_UDSE.EXE; only on first connection). If the software screen does not
display automatically, open My Computer or Computer, then double-click
EPSON_PJ_UD.
Mac OS X 10.5.1 or higher: After turning on the projector, the setup folder
®
for USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the EPSON USB Display software
(only on first connection).
Monitor port
Connect one end of a VGA cable to the projector's Computer (PowerLite
X11) or Computer1 (PowerLite X11H/X14H) port, and the other end to your
computer's monitor port. If you are using a laptop, switch it to external
display (see "Troubleshooting"). You can also connect an audio cable.
Video device
Connect up to 3 (PowerLite X11) or 4 (PowerLite X11H/X14H) video devices
and press the Source Search button on the projector or remote control to
cycle through them.
PowerLite X11
USB cable
VGA cable
USB cable
VGA cable
USB TypeB
® USB Display software
Audio cable
S-Video cable
Component video to VGA cable
RCA video cable (composite video)
PowerLite X11H/X14H
USB Device, Camera or Document Camera
(PowerLite X11 only)
Connect a digital camera, USB flash drive, EPSON document camera DC-06, or
other USB device to the projector's
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector's Slideshow feature to project images. See the User's Guide on
your projector CD for details.
External speakers
You can also connect external speakers to your projector to enhance your
presentations. See the User's Guide on your projector CD for details
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector. The power light on the projector turns orange.
3
Open the A/V Mute slide all the way.
4
Press the power button on the projector or remote control. The
projector beeps, and the power light flashes green and then stays on.
Note: To shut down the projector, press the
unplug it. You don't have to wait for the projector to cool down.
S-Video cable
Component video to VGA cable
Audio cable
RCA video cable (composite video)
TypeA (flat) USB port.
power button twice, then