Aiphone GH Series Quick Start Installation Manual page 20

Apartment intercom system

Hide thumbs Also See for GH Series:

8-5

Programming (GH-NS)

a. Programming with a PC

• Use the connection cable that comes with GH-NS to connect

your PC to GH-NS.

• In your PC, install the setup tool program from the CD that

comes with the GH-BC.

• For information on how to use the setup tool, see the text (.txt)

file that is installed in the same folder as the setup tool (.exe).

PC is recommended.

b. Programming with GH-NS and GH-10K

• Confirm that "Welcome" is shown on the Display, indicating

that the system is in standby mode.

• You can change the "Welcome" text.

• First, set the system to program mode.

Press " (D® " and enter the 4-digit ID code.

| re-enter id code | is displayed, re-enter " ®" and the 4-digit ID

NOTE: To display only resident name without room number; Set

the switch (#2) to ON.