Before Use; Selecting A Sanding Sheet; Fitting The Sanding Sheet - Parkside 435298 2304 Instructions Manual

■ RISK OF FIRE DUE TO FLYING SPARKS!
Sanding metal causes sparks. Ensure that
nobody can be put at risk and that no combus-
tible materials are located in the immediate
vicinity of where you are working.
■ Hold the power tool by the insulated gripping
surfaces, as the grinding surface could hit its
own cable. Damage to a live wire may make
exposed metal parts of the power tool live and
could give the operator an electric shock.
WARNING! TOXIC VAPOURS!
► Working with the tool can produce harmful/
toxic dusts that represent a health hazard for
the person operating the appliance and for
any other people in the area.
WARNING! RISKS DUE TO DUST!
► When working for extended periods of time
on wood and, in particular, materials that
produce dust that is hazardous to health,
connect the tool to an appropriate external
dust extraction tool. Wear safety goggles
and a protective dust mask!
■ Ensure sufficient ventilation when working on
plastics, paints, lacquers, etc.
■ Do not soak the materials or the area to be
processed with liquids containing solvents.
■ Never work on moistened materials or damp
surfaces.
■ Avoid sanding lead paint or other harmful
materials.
■ Do not process materials containing asbestos.
Asbestos is a known carcinogen.
■ Avoid contact with the sanding sheet while the
appliance is running.
■ Do not use the appliance without a sanding
sheet fitted.
■ Never use the appliance for purposes other
than those for which it was designed, and only
use original parts/accessories. Using attach-
ments or accessory tools other than those
recommended in the operating instructions can
lead to a risk of injury.
PMS 160 B2
■ Always allow the appliance to come to a
complete standstill before putting it down.
■ The appliance must always be kept clean,
dry and free from oil or grease.

Before use

Selecting a sanding sheet

Removal and surface
The material removal rate and surface quality are
determined by the grain strength of the sanding
sheet.
♦ Please note that you need to use appropriate
sanding sheets with different grains for working
different materials.

Fitting the sanding sheet

WARNING!
► Always remove the plug from the mains
power socket before carrying out any work
on the tool.
NOTE
► Before fitting a new sanding sheet, remove
any dust and dirt from the sanding plate 7.
Attaching sanding sheets using Velcro
♦ You can attach the sanding sheet to the sanding
plate 7 using Velcro (see fig. A on the fold-out
page).
♦ Ensure that the extraction holes on the sanding
sheet match up with those on the sanding plate.
Removing sanding sheets fitted using Velcro
♦ Simply pull the sanding sheet off the sanding
plate 7.
GB │ IE │ NI │
5 ■