Visor - Shark RS-JET CARBON Owner's Manual

HANDLING VISOR REMOVA
- To open the visor, move it to the left to
get it out of the locking pin. Then raise
the visor.
- To close, simply fold the visor down all
the way. It will lock automatically.
VISOR REMOVAL
1 - Rotate the locking pin forward.
Repeat the operation on the other side.
2 - Remove the visor by pulling
forward.
12
L
AUDIBLE MOTION INDICATOR
You can increase the sound level of the
notching by tightening or loosening the
visor tightness screw.
WARNING! If you are not sure that
the visor has been reassembled
correctly, do not use your helmet. While
1 1
riding, the visor could detach from the
helmet suddenly and without warning,
causing a loss of control of your
motorcycle, resulting in an accident,
injury or death. We advise you to
contact your retailer for any assistance
and advice.
WARNING! If you are riding at high
speed, do not open the visor.
It could come loose and leave your eyes
and face unprotected.
2 2
Additionally, your head could be
pulled backward or sideways, which
could cause you to lose control of
the motorcycle, causing an accident,
personal injury or death.
WARNING! Tinted or coloured
visors should never be used at night
or in poor visibility conditions as they
impair your vision. Never ride with a
foggy visor.
WARNING! If your visor does
not guarantee excellent visibility
after a period of use, it is absolutely
necessary to replace it. We advise you
to always ride with optimal visibility.
1 1
2 2